RH-N95 Decontamination System

HELPING OUR MEDICAL PROFESSIONALS FIGHT COVID-19

Decontaminates N95 Respirator Masks for multiple use. (tested to 20 cycles)

The RH-N95 provides a fast, effective method of decontaminating N95 masks without compromising mask performance – Up to 100 masks per hour.

Through the convenience of on-site reprocessing of used N95 masks using the tabletop RH-N95, healthcare facilities can achieve required level of viral kill, while maintaining mask performance and function.

On-site decontamination will assure that personnel can receive their previously used mask. Units can be installed in departments, floor, units or wings of healthcare facilities.

Contact Us

THE RH-N95 FEATURES

• Low temperature @ 162­­°F
• 30 minute cycle
• 50 mask capacity
• No chemicals or water required
• No drying or aeration
• Energy efficient
• Easy touch screen operation

SUMMARY OF CPAC EQUIPMENT’S HVHA RAPIDHEAT™ RH-N95 MASK/RESPIRATOR RE-PROCESSOR

Reconfigured from CPAC Equipment’s RH-Pro series of FDA-cleared sterilizers, the RapidHeat RH-N95 Mask/Respirator Re-processor has been designed to decontaminate N95 respirators, to counteract the severe shortage of N95 masks during this pandemic. RH-N95 offers the following features/advantages over other thermal, chemical, and radiological alternatives as listed below.

RH-N95 Features

• Preferred decontamination process (Stanford Report, March, 2020 that provides documented evidence of maintaining filtration and breathability performance (no electrostatic charge reduction in melt-blown fibers used as viral filtration fabric)
• Meets or exceeds published (peer-reviewed) > 6 Log10 reduction requirements for coronavirus and Mycobacterium to assure coronavirus kill and that of other non-spore pathogens as well
• Meets FDA criteria to market device for coronavirus decontamination under FDA’s emergency authorization
• Dedicated unit for the re-processing of N95 respirators/masks
• Requires no water in its operation
• Requires only 110-115V or 220-240V electric service
• No ancillary chemical or other treatment or supply products required
• No drying time required after treatment; masks are cool to the touch in seconds after their removal from the unit and ready for immediate re-use
• No residues to evacuate from treated masks after treatment; no worry about lingering toxic, chemical residues to sensitive nasal passages, facial skin, and other respiratory passages
• Ability to monitor decontamination parameters (time-temperature). Other non-thermal processes have no method to measure chemical concentrations at site of required kill
• No deformation in mask structure or change in filtration/breathability performance for atleast twenty (20) re-use cycles
• Multi-purpose unit that functions as N95 mask re-processor, but can be simply re-programmed via USB port to be used as a medical/dental sterilizer (FDA-cleared) post-pandemic
• Countertop unit with small footprint at 11” (279mm)W x 17.75” (433mm)D x 11.75” (299mm)H which can be placed almost anywhere electrical service is available
• Large rectangular decontamination chamber volume: 2294 cubic inches (10 gal/38 liters)
• Stainless steel construction
• TUV, UL, CE – approved
• Four-tray configuration allowing approximately 100 masks to be processed per hour
• Direct time-temperature documentation at mask location to ensure decontamination conditions are met (72°C, 162°F; 30 minutes) via an autonomous time-temperature sensor; replaces the need for chemical indicators
• Offers point-of-use mask decontamination to serve need on ships, on med-evac aircraft, for field operations, and within hospital wings/floors/departments